W1FIND(1)
===========
:doctype: manpage


NAME
----
w1find - Find 1-Wire weather sensors


SYNOPSIS
--------
*w1find* DEVICE


DESCRIPTION
-----------
w1find searches for and displays sensors for the w1retap(1) package.


OPTIONS
-------
'DEVICE'::
        Interface device, the DEVICE can be serial DS2480 adaptor or a USB 
        DS2490-1 adaptor. Use the serial device node (eg /dev/ttyS0 or 
        /dev/ttyUSB0) for serial or use DS2490-1 to use libusb for a USB 
        adaptor.


EXAMPLE
-------
 * $ w1find /dev/ttyUSBS0 
 * $ w1find DS2490-1


SIGNALS
-------
The w1retap daemon accepts three signals. SIGUSR1 causes it to read all the 
sensors immediately. SIGUSR2 causes it to print the current configuration. 
SIGHUP causes it to re-read the configuration.


EXIT STATUS
-----------
*0*::
Returns 0 on success

*1*::
Returns 1 on failure


SEE ALSO
--------
w1retap(1), w1sensors(1)


RESOURCES
---------
 * /usr/share/doc/w1retap-doc/w1retap.odt
 * http://www.zen35309.zen.co.uk/wx/tech.html


AUTHOR
------
This manual page was written by Thomas Stewart <thomas@stewarts.org.uk> for 
the Debian GNU/Linux system (but may be used by others). Permission is granted 
to modify and distribute this manpage under the terms of GNU General Public 
Licence version 2 or (at your opinion) any later version.


